Transmission and Data Sets
The baud rate is 115200 bps. If the requested signals correspond together to a higher data transmission rate,
it can lead to a loss of data. The number of signals is limited from the monitor to three ECG signals,
three compound ECG signals (non-EASI mode), and eight non-ECG signals.
The signals have following scanning rates:
- ECG Signal: 2 ms
- Compound ECG Signal: 4 ms
- Non-EKG Signal: 8 ms or 16 ms
- Numeric-Signal: 1 s
Recommended pieces for multi-user-system
- Up to 6 monitors and licenses per computer
Recommended Hardware
Single user System
- operating system: Microsoft Windows 2000/XP
- CPU with 1,5 GHz
- 512 MB RAM and 20 GB hard disk (also external hard disk with usb 2.0) depends on data quantity and recording time, e.g.
25 MB for one ECG-Signal/hour.
- CD ROM (only needed for installation from CD)
- color display and graphics card (screen resolution 1024x768)
- serial interface and adapter cable to connect the monitor (more under: System and Connecting)
Multi user System
- operating system: Microsoft Windows 2000/XP
- P4 / 2.8 Ghz
- 1 GB RAM and 300 GB hard disk (also external hard disk with usb 2.0) depends on data quantity and recording time, e.g.
25 MB for one ECG-Signal/hour.
- CD ROM (only needed for installation from CD)
- color display and graphics card (screen resolution 1024x768)
- serial interface and adapter cable to connect the monitor (more under: System and Connecting)
PDA: Windows CE, JavaVM (only vizualiation on the screen, no recording possible)
|
|
Topics
Contact
You can contact us to the usual office hours under:
Phone: +49 (0) 33 75 - 26 80 88
Fax: +49 (0) 33 75 - 50 71 80
E-Mail: info@ixellence.com
Order
|
